What is the thermal conductivity of Inconel alloy?

Oct 15, 2025

Hey there! As a supplier of Inconel alloy, I often get asked about the thermal conductivity of these super - cool materials. So, I thought I'd sit down and write this blog to give you the lowdown on what the thermal conductivity of Inconel alloy is all about.

First off, let's understand what thermal conductivity means. In simple terms, thermal conductivity is a measure of a material's ability to conduct heat. A high thermal conductivity means that heat can pass through the material quickly, while a low thermal conductivity indicates that the material is a poor conductor of heat and can act as an insulator to some extent.

Inconel alloys are a group of nickel - chromium - based superalloys that are well - known for their excellent corrosion resistance, high - temperature strength, and oxidation resistance. These alloys are used in a wide range of applications, from aerospace and gas turbines to chemical processing and nuclear power plants.

Now, the thermal conductivity of Inconel alloys can vary depending on several factors, including the specific composition of the alloy, its temperature, and its microstructure. Different types of Inconel alloys have different thermal conductivity values.

Let's take a look at some common Inconel alloys and their thermal conductivity characteristics.

UNS N06600

UNS N06600 is one of the most widely used Inconel alloys. It has a relatively low thermal conductivity compared to some other metals. At room temperature (around 20°C or 68°F), the thermal conductivity of UNS N06600 is approximately 14.2 W/(m·K). As the temperature increases, the thermal conductivity of this alloy also changes. For example, at 500°C (932°F), its thermal conductivity rises to about 18.3 W/(m·K). This increase in thermal conductivity with temperature is a common behavior for many metals and alloys.

The relatively low thermal conductivity of UNS N06600 makes it a good choice for applications where heat transfer needs to be controlled. For instance, in some high - temperature furnace components, the low thermal conductivity helps to reduce heat loss and improve energy efficiency.

UNS N07718

UNS N07718 is another popular Inconel alloy. It has a different thermal conductivity profile compared to UNS N06600. At room temperature, the thermal conductivity of UNS N07718 is around 11.4 W/(m·K). This value is lower than that of UNS N06600 at the same temperature.

As the temperature goes up, the thermal conductivity of UNS N07718 also increases. At 650°C (1202°F), its thermal conductivity reaches approximately 18.7 W/(m·K). The lower thermal conductivity at lower temperatures can be beneficial in applications where heat insulation is required, such as in some aerospace engine components where minimizing heat transfer to the surrounding areas is crucial.

_20250220210314_20250220210306

2.4856 Inconel 625

2.4856 Inconel 625 is known for its excellent corrosion resistance and high - strength properties. Its thermal conductivity at room temperature is about 9.8 W/(m·K), which is relatively low compared to the other two alloys we've discussed.

As the temperature rises, the thermal conductivity of 2.4856 Inconel 625 also shows an upward trend. At 800°C (1472°F), its thermal conductivity can reach around 17.4 W/(m·K). The low thermal conductivity at room temperature makes it suitable for applications where heat retention or insulation is important, like in some chemical processing equipment where maintaining a specific temperature within the system is necessary.

So, why does the thermal conductivity of Inconel alloys change with temperature? Well, it has to do with the way the atoms in the alloy interact with heat energy. At lower temperatures, the atoms in the alloy are more tightly bound, and there are fewer free electrons available to carry heat. As the temperature increases, the atoms start to vibrate more vigorously, and the number of free electrons increases, allowing heat to be transferred more easily through the material.

The microstructure of the Inconel alloy also plays a role in its thermal conductivity. For example, if the alloy has a fine - grained microstructure, it may have a different thermal conductivity compared to an alloy with a coarse - grained microstructure. Heat can be scattered at the grain boundaries, affecting the overall heat transfer efficiency.

When choosing an Inconel alloy for a specific application, the thermal conductivity is just one of the factors to consider. Other properties like corrosion resistance, mechanical strength, and cost also need to be taken into account.

If you're in the market for Inconel alloy and are wondering which one is the best fit for your project based on thermal conductivity and other properties, don't hesitate to reach out. We're here to help you make the right choice. Whether you need UNS N06600 for your high - temperature furnace, UNS N07718 for your aerospace components, or 2.4856 Inconel 625 for your chemical processing equipment, we've got you covered.

Contact us to start a procurement discussion and find the perfect Inconel alloy solution for your needs. We'll work closely with you to understand your requirements and provide you with the best quality products at competitive prices.

References

  • ASM Handbook Volume 2: Properties and Selection: Nonferrous Alloys and Special - Purpose Materials
  • "Inconel Alloys: Properties and Applications" by various industry experts in metallurgy