
Heat-Resistant Steel 321
321 Stainless Steel (UNS S32100) is a titanium-stabilized austenitic stainless steel designed for high-temperature environments, offering exceptional resistance to intergranular corrosion and sustained thermal strength. With a maximum service temperature of 900°C (intermittent), it is ideal for energy equipment, chemical transport, and aerospace applications.
Top Brief Introduction

321 Stainless Steel (UNS S32100) is a titanium-stabilized austenitic stainless steel designed for high-temperature environments, offering exceptional resistance to intergranular corrosion and sustained thermal strength. With a maximum service temperature of 900°C (intermittent), it is ideal for energy equipment, chemical transport, and aerospace applications. Globally certified with performance surpassing 304 series, it is the optimal choice for high-temperature corrosive conditions.[Learn More](#property-analysis)
Core Features & Advantages
High-Temperature Stability
- Withstands up to 900°C (intermittent) and 925°C (continuous). Titanium (Ti≥5×C%) suppresses chromium carbide precipitation, enhancing resistance to intergranular corrosion, especially in 425-900°C environments.
- 321H variant improves creep resistance via controlled carbon content (≤0.08%), ideal for boilers and heat exchangers.
Corrosion Resistance
- Matches 304 in annealed state but excels in chloride and acidic media at elevated temperatures.
- Tolerates 200mg/L chlorides in drinking water (20°C), reduced to 150mg/L at 60°C.
Machining & Welding
- Excellent formability without post-weld annealing, but limited polishability.
- Welding Note: Requires 347/347Si filler due to titanium's arc transfer limitations.
Performance vs. Alternatives
|
Material |
Best For |
Limitations |
|
321 |
500-900°C corrosive structures |
Unsuitable above 1100°C |
|
304L |
Post-weld corrosion resistance |
Lower thermal strength |
|
310 |
Up to 1100°C |
High cost, poor low-T toughness |
|
253MA |
Extreme heat (1150°C) |
Niche high-temperature use |
Key Applications
Energy Sector
Boiler shells, burner ducts, heat exchanger tubes
01
Chemical Transport
Acid-resistant linings, tanker trucks
02
Automotive
Exhaust manifolds, diesel silencers
03
Aerospace
Aircraft exhaust systems, high-temperature filters
04
Physical & Mechanical Properties (Annealed)
|
Density |
8.03 g/cm³ |
Melting Point |
1398-1427°C |
|
Tensile Strength |
≥520 MPa |
Yield Strength |
≥205 MPa |
|
Elongation |
≥40% |
Hardness |
≤187 HB |
Hot Tags: heat-resistant steel 321, China heat-resistant steel 321 manufacturers, suppliers, factory, 1 4539 material, 1 4541 stainless steel, 309S Stainless Steel Flat Bar, 310 stainless steel plate, aisi 321 stainless steel, sae 904l stainless steel
Global Grade Equivalents
|
Country/Standard |
Designation |
|
|
China |
06Cr18Ni11Ti (GB/T) |
|
|
USA |
S32100 (ASTM), 321 |
|
|
Japan |
SUS321 (JIS) |
|
|
Germany |
1.4541 (DIN) |
|
|
Europe |
X6CrNiTi18-10 (EN) |
Send Inquiry








