Maintenance of resistance wire
Mar 05, 2025
Maintenance of resistance wire mainly includes the following aspects:
Cleaning: Clean the dirt and dust on the surface of the resistance wire regularly to ensure good heat conduction and heat dissipation. You can use a soft brush or compressed air for cleaning, avoid using a wet cloth or liquid detergent to contact the resistance wire to avoid short circuit or damage.
Avoid overload: Avoid overloading the resistance wire, exceeding its rated power and operating temperature range. Excessive current and temperature may cause damage or aging of the resistance wire, reducing its life and stability.
Check the connection: Check the connection part of the resistance wire regularly to ensure that the connection between the resistance wire and the power supply and controller is firm and reliable. Loose or corroded connections may cause abnormal operation or damage of the resistance wire, so it should be repaired and replaced in time.
Prevent vibration: For resistance wires installed in a vibrating environment, appropriate fixing measures need to be taken to reduce the impact of vibration on the resistance wire. Excessive vibration may cause the resistance wire to break or break, affecting its normal operation.
Regular inspection and cleaning: Regularly inspect and clean the scale, iron filings and other debris in the furnace to prevent short circuits and component damage. Especially for the bottom plate, furnace tank and other parts, the scale should be lifted and knocked regularly to clean the scale to prevent the parts from collapsing or burying.
Avoid metal contact: Avoid contact between non-ferrous metals such as copper, aluminum, zinc, tin, and lead and electric heating elements to prevent corrosion and damage at high temperatures. Corrosion will cause the cross-section of the element to become smaller and eventually burn out due to overheating.
Fasteners inspection: Regularly check fasteners such as lead-out rod wiring clamp bolts to prevent loosening due to thermal deformation, thermal shrinkage, etc., resulting in poor contact or short circuit.
Furnace lining maintenance: If the electric furnace lining is slightly damaged and loose, it can be repaired with mud coating; if the damage is serious, it must be rebuilt according to the electric furnace masonry procedure. After rebuilding, it needs to be baked according to the electric furnace lining baking procedure.






